Item code
Z-420-24
Product name
Syncro-Clik Pressure Lid, Ø 24 cm
Warranty
10 years - the elements of the Syncro-Clik lid made of Cr/Ni 18/10, 304 or 316L stainless steel; 2 years - the remaining elements
Gross weight [KG]
2.5
Net weight [KG]
1.85
Application
Lid for pressure cooking at home
Producer
HOME ART. & SALES SERVICES AG, Sihleggstrasse 23, 8832 Wollerau - Switzerland
Made in
Italy
Material
ASTMA 240 304 or 316 L
Diameter
24 cm
Working pressure
Cooking pressure: 1 bar
Maximum cooking pressure: 1.50 Bar
Protection
A pressure valve opening at: 1 Bar
A safety valve opening at: 1,35 Bar
Special seal structure
Compatible pots
Z-2490, Z-2470, Z-2455, Z-2440, Z-2430
Suitable for use in the dishwasher
YES
Suitable for use in the oven
NO
Recommendations
Technical services every 24 months of use
Certifications/Declaration
The Approval Authority responsible for investigating: TÜV Italia 0948
The Approval Authority responsible for the analysis of the quality system: TÜV Italia 0948
The Harmonized Standards EN 12778: 2006 for research
Applied Technical Specification: EN 12983/1
The product corresponds to the European Council Directive 97/23 / CE
Declaration of Conformity concerning the Regulation (EC) Nº1935/2004 on materials and articles intended to come into contact with food which – when used properly - do not release any substances harmful to health.
Safety Instructions
WARNING! For safety reasons, be careful
After removing the packaging, make sure the SYNCRO-CLIK® lid is intact.
If you do not understand the presented information, do not use the SYNCRO-CLIK® lid and refer to professionally Zepter qualified personnel.
Read more
The SYNCRO-CLIK® lid cannot be used by children and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge.
Always follow the basic safety precautions mentioned in the user manual and supervise it closely when cooking under pressure.
Do not put the SYNCRO-CLIK® lid into oven.
Do not use masterpiece cookware with SYNCRO-CLIK® lid to fry under pressure using oil.
Don’t shake the masterpiece cookware when system is pressurized.
Warning! Do not use the SYNCRO-CLIK® lid if any damage is shown on the lid or on the cookware. Hazard of explosion.
Make sure the SYNCRO-CLIK® lid is closed properly before cooking.
Warning! Do not use force to open lid. Hazard of injury.
Ensure that masterpiece cookware is filled with water before cooking starts. Never let the masterpiece cookware boil dry or use without any liquid. It can result in its damage.
The water level inside of the masterpiece cookware must not be less that 1/3 or over 2/3 of the cookware capacity.
Warning! Do not fill pressure cooker to more than half of its capacity for those foods that expand during the cooking process, such as rice and dehydrated legumes. It can clog safety elements.
Attention! Before use always check if the valves are clean and without obstacles (e.g. food residues).
Do not expose the SYNCRO-CLIK® Lid to severe weather elements, such as: rain, hail, snow, wind, etc.
The SYNCRO-CLIK® lid should be cleaned only with a soft cloth. Never use abrasives, alcohol or other solvents. Always allow the SYNCRO-CLIK® lid to dry completely before putting it away.
Do not start cooking under pressure if any wear and tear or damage sign is visible on masterpiece cookware and/or SYNCRO-CLIK® lid.
As soon as the rubber seal ring looks worn out (with flaws, brittleness or defects) replace it.
For any repairs refer only to your Zepter Repair Centre.
Use only the Zepter original spare parts.
The SYNCRO-CLIK® lid is intended for domestic use only and can only be used as described in the user manual and for the designated purposes (e.g. food cooking under pressure). The producer cannot be held responsible for any damage deriving from commercial use, improper, incorrect or unreasonable use.
Warning! For the safe operation of your SYNCRO-CLIK® lid, after each use strictly follow the cleaning and maintenance instruction, as any small food residues, such as a grain of rice or bean shell, could block safety elements.
Attention! Do not attempt to dismantle other parts of the SYNCRO-CLIK® lid other than those mentioned.
Attention! Never dismantle locking mechanism. Tampering with this mechanism will invalidate your warranty and can have negative consequences on safety and lid functionality.
Attention! It is recommended to replace the rubber seal every second year or sooner if the rubber changes the look and structure (i.e.hardnes, shows cracks)
Attention! To replace a rubber seal use only original Zepter seal of correct size for your SYNCRO-CLIK® Lid.
Warning! Ensure all parts are clean of any food residues. Otherwise it can result in valve blockage. Hazard of explosion!
Attention! If the temperature indicator approaches the red field, lower the heat to minimum immediately.
Warning! The SYNCRO-CLIK® lid must be clean after each use.