Item code
PWC-670-BLACK
Product name
EdelWasser Black
Warranty
2 years
Gross weight [KG]
6
Net weight [KG]
4.5
Application
For home use. A device for water filtration by reverse osmosis.
Producer
HOME ART. & SALES SERVICES AG , Sihleggstrasse 23 , 8832 Wollerau-Switzerland
Functions
Water filtration
Purifying method
Reverse osmosis
Type applied filters
RO membrane filter 20 GPD (main), carbon filter, mechanical filter, antibacterial filter
Dimensions
200 mm (width) x 390 mm (depth) x 370 mm (height)
Color
Black & white
Working temperature
From 5ºC to + 35ºC
Maximum Daily Water Production Volume
76,8 l/d - 112 l/d (for conditions: water temperature 25 degC, 138 kPa / 1,34 bar/20 psi / 344,74 kPa / 3,45 bar / 50 psi)
Protection
Float valve (cutting off water filtration)
Voltage
NOT APPLICABLE
Filter replacement frequency
Recommended term of replacement, counted from the date of installation:
PWC-670-01 NEO SENSE - mechanical filter - every 6 months
PWC-670-02 INNO SENSE – mechanical-carbon filter - every 18 months
PWC-670-03 RO membrane filter 20 GPD - every 20-24 months
PWC-670-09 Hygienic filter – every 12 months
The table shows only approximate, estimated series of exchanges not their warranty period. To ensure the most optimal filtration you may need to replace filters with greater frequency. Speed and quality of the filtration (the yield of water) is mainly dependent on water pressure, temperature and quality of the filtered water. Thus, reverse osmosis system always generate a recoil water. For EDELWASSER the ratio is provided 4:1 and in case of low pressure on the network even 6:1.
Composition
Service and installation manual
The device (with filters Neo-sense, reverse osmosis and Inno-sense)
Elbow (1/4 inch white) - 4 pieces
Clamp into the drain - 1 piece
Water hoses (double enclosure, ¼ inch) - 5m
Adapter ½ (valve1/4) - 1 piece
Hygienic filter – 1 piece
Band clips x 2
Montage
Installation and service of purchased product should be carried out by the Customer on their own or with local plumber or hire local company which provides such services – on Customer cost. These activities should be carried out accordingly to the Manual delivered with product. The Manual is also available in section 'Presentation'. EdelWasser is designed to be installed on the worktop (counter). Installation, operation, maintenance and repair should be performed only by Manual instruction. We recommend preparing the installation site:
• The distance between the place of connection and the place of installation of the device should not exceed 3 m.
• The distance from the source of water should not exceed 3 m. • The distance from the outflow of consumed water should not exceed 3 m.
• The dimensions of the installation site should be consistent with the dimensions of the device.
It is recommended to install the device near the sink to make the inlet and outlet water hoses easily accessible.
Note:
Depending on the installation place and technical possibilities of connecting it to the drainage system, it may be necessary to drill a hole, e,g. in the kitchen worktop, therefore, any additional work to prepare the site and infrastructure for installation/connection of the filter (e.g. specialized drilling of holes in stone, marble or other tops, adaptation of the drainage system, installation of independent water supplies, securing additional connections and valves) must be predicted by the customer.
Made in
Korea
Certifications/Declaration
Declaration of Conformity concerning the Regulation (EC) Nº1935/2004 on materials and articles intended to come into contact with food.
Safety Instructions
Do not install the water filtration system close to a heat source as fire may occur.
• If the device leaks water or water gathers in a pool around the device
close the mains water supply and contact a Zepter Service Centre.
• Do not expose the device to any naked flame (such as candles or lit
cigarette).
• Do not place any containers of water, medicine, food or any metallic
objects, or any flammable material on top of the product.
• Do not disassemble, repair, or modify the product.
All repairs must be carried out by a Zepter Service Centre only.
Warning: If not observed, serious physical injury or property
damage may occur as a result.
• Do not install the product on a sloped surface.
• Don’t apply force to the device or allow it to suffer impact.
• Do not clean by spraying water directly on the surface.
• Don’t clean the product using benzene or thinners.
The filtration device installation shall comply with applicable state and local
regulations.
Caution: If not observed, minor physical injury or property
damage may occur as a result.
• For clean drinking water, please change the filter according to the
replacement cycle.
• Filters at end-of-life will hamper the filtration performance.
• Close the water tank cover completely after use to prevent secondary
pollution.
• When the device has been unused for a long time, drain the water tank
completely, refill and drain again before using.
• Purified water is not suitable for fish tanks and aquariums.
• After moving the product or replacing the post-carbon block filter, black
powder may collect on the bottom of the water tank. This is harmless.
• Do not rotate or lift the device by grasping the purified water tap as
damage may occur.
Do not use with water that is microbiologically unsafe or of unknown quality
without adequate disinfection before or after the system.